Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador descarregar pdf (Página 85)

3 System Settings 75

Disable/Enable EDMX on Startup and Show Load (system setting):

Step 1: In Emphasis Visualization, in the Emphasis mode Setup menu, click IO. The IO

Settings dialog box will open.

Step 2: Click to select “Disable EDMX on Powerup and Show Read”. Checked = EDMX

Disabled; unchecked = EDMX enabled.

• When this box is checked, EDMX will be disabled whenever the system

starts up, and again when any show file is loaded. Checking this box does

not change the current state of EDMX transmission. This setting remains

active on the Emphasis Server until it is changed - it is not stored with any

show file.

• When the system is started or a show is loaded and EDMX is disabled, the

warning message “EDMX Disabled” blinks in red on the console display

where the Grandmaster status is usually displayed.

• After you have executed the appropriate cue or established the appropriate

console state, use the procedure below to enable EDMX.

Step 3: Click OK.

Enable/Disable EDMX manually;

Step 1: Press [Setup] on the Facepanel or on the virtual Facepanel in Emphasis

Visualization

Step 2: Press:

• [S8 - Enable EDMX] [Enter] to enable EDMX transmission after a powerup,

show load or manual disable.

• [S8 - Disable EDMX] [Enter] to disable EDMX transmission manually.

EDMX Output Range Settings

EDMX Output Range settings can be used to limit the EDMX output of the Emphasis

Control System . This is particularly useful in networks with multiple Emphasis systems

controlling various ranges of EDMX addresses. This feature does not affect which

addresses can be patched, parked, flashed or checked. It only affects which EDMX levels

are transmitted. EDMX addresses not included in the controllable range for a system will

not be transmitted to Emphasis Visualization or to the system as a whole. An individual

system can have up to 12 ranges of EDMX addresses assigned. Systems may overlap

addresses within their active ranges. EDMX addresses that are unavailable to a system will

be displayed in purple in the Emphasis Console Patch and About Dimmer displays.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 317 318

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador Página 85