Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador descarregar pdf (Página 108)

98 Emphasis Console v2.0.0 User Manual

Edit Frame Table Values

Step 1: From an open Frame table press <S7 - More Softkeys> and then choose

between <S1 - Start Value>, <S2 - Center Value>, or <S3 - Ending Value>.

Step 2: Type the new DMX value for the respective field.

Step 3: Press [Enter]. The cursor will automatically jump from start value, to center

value, to end value. After the end value it will ask you to select another frame.

Note:

Frame Tables are not referenced data. When recorded, they are only recorded as DMX

values, not as frames. Therefore, changes to Frame Tables will not automatically update

any recorded data (i.e. cues, focus points) attributed to those tables. Any recorded data

associated with a changed Frame Table will need to be re-written to accomodate for the

changes made to the frame table.

Palettes

If you want to create a quick color select, you can use palettes. Palettes are stored in

Emphasis Visualization as a shortcut in the Emphasis mode. They are not referenced by

cues and submasters, but do provide a quick way to recall colors. See the Emphasis

Visualization User Manual for more information on palettes.

Only and Solo

The [Only] and [S3 - Solo] functions can be used with fixtures to limit selections and record

commands to the attribute categories. This is useful if you only want to set the color

channels of a fixture to a focus point, or if you only want to record position channels to a

focus point, for example. You can also use [S3 - Solo] to step through your fixtures,

adjusting them individually, then return to the whole stage look.

Note:

Only is found on [S4 - Only] in Stage, Blind and Fader on Express facepanels.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 317 318

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador Página 108