Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador descarregar pdf (Página 272)

262 Emphasis Console v2.0.0 User Manual

Expression/Insight LPC Installation and Configuration

The Expression/Insight LPC may be mounted in a 19-inch equipment rack, or may be

placed on a stable, horizontal surface. All connections are made on the rear panel of the

unit. All of the connections available on the full Facepanel are available on the LPC, with

the addition of 24 Remote Macros for a total of 32 Remote Macros. See Expression/Insight

LPC Rear Panel, page 300 for a diagram of the LPC connections.

Installation Guidelines

• Make sure to leave at least six inches of space behind the unit’s fan to ensure proper

cooling.

•See Installation Guidelines, page 9 for general instructions for setting up your

Emphasis Control System.

Configuration Guidelines

The Expression/Insight LPC requires a configuration setting to tell the Emphasis Server

that it has no integral submaster faders. It also provides additional Remote Macros that may

require some configuration. These settings are described here.

Note:

You have the same configuration options for DMX input, output, and show control

protocols (MIDI, MSC and SMPTE) that the full Facepanel provides. These settings are

described in Control Interfaces, page 201.

Enter the configuration menu on the Expression/Insight LPC:

Step 1: Power up or reboot the LPC and turn on the monitor.

Step 2: When the prompt appears on the monitor at startup, press [1][2][3] on the

touchscreen or RFU to enter the configuration menu. Once you have entered the

configuration menu, use the touchscreen to enter data.

Set the LPC Mode:

Step 1: Enter the configuration menu.

Step 2: Using the arrow keys on the touchscreen, highlight the Lighting Playback

Controller option in the menu and press [Enter].

Step 3: Press [Enter] to toggle the Lighting Playback Controller Mode from Disabled to

Enabled. When LPC Mode is Enabled, the Emphasis Control System will know

there are no submaster faders at the Facepanel, and will allow submaster control

from the Emphasis Console screens within Emphasis Visualization. When LPC

Mode is Disabled, the Emphasis Control System will expect submaster faders at

the Facepanel and will not allow submaster control from the Emphasis Console

screens within Emphasis Visualization.

Step 4: Press [S8] to save your settings and exit to the main configuration menu.

Configure Remote Macros:

See Remote Macros, page 205 for setting the Remote Macro assignments.

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 317 318

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador Página 272