Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador descarregar pdf (Página 128)

118 Emphasis Console v2.0.0 User Manual

MBB Rules:

Any cue that fits all of the requirements below will execute an MBB delay and fade all

moving non-intensity channels of fixtures that fade their intensity up from zero in the next

cue:

• The next (bright) cue must have one or more non-intensity (pan, tilt, color, etc.) fixture

channels that move

• The next cue must have the fixtures’ associated intensity channel(s) on (at a level

above zero)

• The current (dark) cue must have the fixtures’ associated intensity channel(s) off (at

zero)

• The MBB flag for the next cue must be enabled. This applies to subroutine steps as well

as cues in the cue list

• Move Before Bright must be enabled in System Settings.

There shall be no MBB execution in any of the following situations:

• The dark cue is run by pressing the [Back] button

• Quickstep is enabled

• The dark cue is executed because of a “Jump to Cue” step in a subroutine.

View MBB Status

You can view the MBB status of channels and cues. Channel information is displayed in the

About Channel window. Channel status may be noted as “Wait”, “Running”, “Done” or

“None”. Channels affected by MBB are displayed in blue on the Stage display.

Cue status is indicated in the A/B and C/D fader status displays and in the Subroutine

window. If MBB will run at the end of the running cue or subroutine step, the window

displays “Wait”. If MBB is currently fading, the display indicates “MBB”. If the MBB has

finished, but the bright cue has not yet started, the display indicates “Done”.

MBB Settings

To enable MBB and set the delay and fade times, you will need to use the System Settings

menu.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 317 318

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador Página 128