Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador descarregar pdf (Página 217)

9 Control Interfaces 207

To set the Remote Trigger ID values on the Express facepanel:

Step 1: Power up or reboot the Express facepanel.

Step 2: When the prompt appears at startup, press [1][2][3] to enter the configuration

menu.

Step 3: Using the down-arrow [

v] key, scroll to Remote Macros and press [Enter].

Step 4: With “Trigger Out System ID” highlighted, press [Enter].

Step 5: Using the facepanel numeric keypad, enter the System ID number. This number

should match the system ID of the facepanel and server.

Step 6: With “Trigger Out Trigger ID” highlighted, press [Enter].

Step 7: Using the facepanel numeric keypad, enter the ID number. This may be any

value between 0-255 (“0” will disable the Remote Trigger). The default value is

“1”. This value should match the value you set in Emphasis Visualization.

Step 8: Press [Enter].

Note:

If you make an error while changing any of these settings, and you want to return to the

previously stored values, do not press

[S8]. Simply turn the facepanel power off and on

again. The previous settings will be restored.

Step 9: Press [S8] to save your settings and exit the Remote Macro configuration

screen.

Step 10: Press [S8] to save your settings and exit the main configuration screen.

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 317 318

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Manual do Utilizador Página 217