Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 86)

72 Ion Operations Manual

Calibrating a Scroller

You can calibrate the center point of any frame in a scroller using the calibrate feature.This will

ensure that color scroll frames will be centered over the aperture of the fixture when you advance

a color scroll frame-by-frame. You can do this using the virtual encoders or the encoder LCD.

To calibrate a scroller:

Step 1: In the browser, navigate to Virtual Controls>Encoder. A new window will open in

the CIA.

Step 2: Select {Open as Primary Display} in the CIA. Virtual encoders will open on the

display screen.

Step 3: Select the channel of the scroller you wish to calibrate.

Step 4: Press the [Color] encoder button to the upper right of the LCD. Multiple presses may

be required before the scroller encoder is visible in the virtual encoder display.

Step 5: Use the encoder to move all the way to the last frame of the scroller.

Step 6: Watch the scroller and continue adjusting the frame until it is centered in the desired

position.

Step 7: Click {Calibrate} in the virtual encoder display. The new center position is now stored

for the selected channel.

Step 8: Click {Last} in the virtual encoder display to move to the center point of the previous

frame.

Step 9: Visually verify if the center point of the new frame is accurate. If it is, press {Last} again

to move to the previous frame in the scroll. If not, follow the calibration procedure

again.

Step 10: Repeat steps 6-9 until you have calibrated all of the frames.

Step 11: Press [Live] or [Blind] to close the virtual encoder display.

You can also calibrate from the encoder LCD. This eliminates the need for the virtual encoder

display.

To calibrate from the LCD:

Step 1: Select the channel of the scroller you wish to calibrate.

Step 2: Press the [Color] encoder button to the upper right of the LCD. Multiple presses may

be required before the scroller encoder is visible in the virtual encoder display.

Step 3: Use the encoder to move all the way to the last frame of the scroller.

Step 4: Watch the scroller and continue adjusting the frame until it is centered in the desired

position.

Step 5: Press and hold the scroller encoder. {Calibrate} becomes visible as a softkey in the

encoder LCD.

Step 6: Press {Calibrate}. The new center position is now stored for the selected channel.

Step 7: Continue holding the encoder and press {Last} to move to the center point of the

previous frame.

Step 8: Visually verify if the center point of the new frame is accurate. If it is, press {Last} again

to move to the previous frame in the scroll. If not, follow the calibration procedure

again.

Step 9: Repeat steps 6-9 until you have calibrated all of the frames.

Note:

It is recommended that you calibrate your scroller frames starting with the last

frame and working backward to the first frame. This will help ensure a complete

and accurate calibration.

Calibration may need to be performed when you initially patch a scroller and may

need to be adjusted through the course of operation as spring tension changes in

a color scroller

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 337 338

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 86

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Electronic Theatre Controls Emphasis Lighting Control System