Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 81)

5 Patch 67

Patch Channels from the Encoder LCD

You may use the encoders and LCD to patch channels in Ion. This is an alternative to using the

methods described above. The end result will be the same, this simply gives you the ability to patch

without requiring the use of the mouse.

To patch channels from the encoders and LCD:

Step 1: Press [Displays]>{Patch}. The LCD will change to display the patch interface.

Step 2: Select the channel you wish to patch.

• [9] [7] [Enter]

Step 3: Using the encoders directly above “Manufacturer”, select the manufacturer of the

fixture you want to patch. Once the manufacturer is selected, the fixtures available

from that manufacturer automatically load to the “Type” encoder.

Step 4: Select the desired fixture type from those available from the manufacturer using the

encoder above the “Type” field. When the desired type is displayed, press the “Type”

encoder to select the displayed fixture type.

Step 5: Change the DMX universe, if needed, using the encoder above the “Universe” field.

Step 6: Set the DMX address to the desired number using the encoder above the “Address”

field. address number is shown as 1-512 with the absolute address displayed in

parentheses. When the proper address is shown, press the encoder to select the

address. Your fixture is now patched.

Note:

If you wish to patch a standard dimmer, select “Generic” from the manufacturer list

and “Dimmer” from the fixture list. Or you can simply press the [At] key (as in

Patching a Dimmer, page 58) and dimmer is assumed.

Softkeys

Command

Line

Encoder ID Fields

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 337 338

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 81