Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 304)

290 Ion Operations Manual

Hardware Setup

Rear Panel

Step 1: Attach the appropriate IEC power cord to the power connector, then to an AC

receptacle.

Step 2: Attach the dual DVI connector/Y-adapter to the DVI port.

Step 3: Connect the USB mouse and keyboard to the USB connectors. If you wish to use a

PS2 mouse or keyboard (not provided), use the appropriate connectors on the RVI.

Step 4: Attach a network ethernet cable to the Ethernet port. All communications to the

associated control console are made over this Ethernet connection.

• Connection to the console may be made either directly using a Cat5 or better

null-modem cable or through an Ethernet hub or Ethernet switch using standard

Cat5 or better patch cables.

Step 5: When all connections are made, activate the hard power switch on the rear panel.

Step 6: Press the soft power switch, on the front of the unit, to power up the RVI.

Note:

If you have VGA monitors, attach the VGA adapters (provided) to the DVI Y-

adapter. Do not use the VGA connectors on the back of the RPU.

In Eos, the minimum screen resolution must be at least 1280x1024 with 32 bit

color.

Note:

If the unit does not power up, check the hard power switch on the rear panel, to

ensure it is switched on.

AC Input

Net3 RVI

100-240 VAC

50/60 Hz 2A

Electronic Theatre Controls, Inc.

Middleton, WI Made in USA

Dual DVI Display

BTX - L OP IOSHLDR

Hard Power

Switch

AC Power

IEC connector

Dual DVI

Display

Mouse

Keyboard

USB

Not Used

Ethernet

RS-232

1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 337 338

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 304

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Electronic Theatre Controls Emphasis Lighting Control System