Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 194)

100

101

180 Ion Operations Manual

Out of Sequence Cues

An out-of-sequence cue is any cue that is played back in one of the following ways:

• Cue is executed using a [Go To Cue] command

• Cue is executed by a link instruction

• Cue is loaded into a fader’s pending file

• Cue is re-executed using [Assert] & [Load] or is asserted from the command line

Generally, when an out of sequence cue is executed, the entire contents of the cue will be played

back (move instructions and tracked values).

For Example:

Cue 1 sets channel 1 to full. That value is tracked forward until cue 10. The programmer

plays back cue 1 on fader 1. Then the programmer sets channel 1's intensity to 50%

manually. If she executes cue 2, channel 1 remains at 50%, as it is a channel parameter

that is not receiving a move instruction from the incoming cue.

However, if she presses [Go to Cue] [5] [Enter] (an out-of-sequence execution), even

though the value for channel 1 in Cue 5 is a tracked value, channel 1 will fade from the

manual value of 50%, to full in the Go-to-cue time.

Captured channels are exempt from these out-of-sequence cue conventions.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 337 338

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 194

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Electronic Theatre Controls Emphasis Lighting Control System