Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 317)

F Universal Fader Wings 303

Appendix F

Universal Fader Wings

Overview

Universal fader wings can be used in conjunction with your Ion console to create up to 200

additional submasters. The wings are available in 10 x 2 or 20 x 2 configurations.

The fader wings are designed to physically attach to your Ion console, thereby receiving power from

the console and eliminating the need for the external power supply. Or you may connect wings to

Ion using a USB cable and provide power using an external power supply.

Rules of Connection

Physical attachment to Ion

When physically attaching wings to Ion, power constraints limit you to a total of no more than six

LCDs total in the system. This includes the LCD in the Ion console. As the 10 x 2 fader wing has

one LCD and the 20 x 2 fader wing has two LCDs, consider this restriction when attaching

numerous wings.

You are also restricted to using no more than three fader wing units per side of Ion, provided that

you do not exceed the six LCD limit.

For example, it is not possible to connect three 20 x 2 wings as this would be a total of 7 LCDs

(including the LCD in Ion). You may connect five 10 x 2 wings, but three must be connected on one

side of Ion and two connected to the other.

USB connection only

When connecting fader wings using an external power supply and USB cable, up to three wings

can be connected together at once. Again, the six LCD limit applies to any single power supply.

Therefore, this method would permit the use of three 20 x 2 wings but would not allow, for example,

four 10 x 2 wings to be connected as this exceeds the three wing limit.

1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 337 338

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 317