Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 193)

15 Cue Playback 179

Selected Cue

The selected cue is always indicated just above the CIA. The selected cue and all of its attributes

are displayed near the bottom of the live/blind display and on the playback status display.

Live / Blind

When working in live, the selected cue is always the last cue you recorded, edited, updated or

played back. When entering blind for cues, the selected cue will be selected and displayed.

Changing the selected cue in blind will cause the playback status display to change as well,

allowing you to see all the attributes of the cues surrounding the selected cue. When you return to

live, the selected cue is synchronized to the last selected cue in that mode.

The attributes of the selected cue (such as timing, attributes, label and external links) are shown at

the bottom of the live/blind display, below the command line.

In Live

To load a new cue to the faders, select the cue on the command line, press [Enter], and then press

[Load]. When the [Go] button is pressed, the activated cue will be the selected cue.

For Example:

Assume cue list 1 is currently loaded to the master fader pair. To load cue 2/1:

• [Cue] [2] [/] [1] [Enter] [Load]

Cue 2/1 will load to the pending file of the master fader pair.

In this example, the last cue executed from cue list 1 is still the active cue, while cue 2/1 is

pending. When [Go] is pressed, 2/1 will be executed.

The selected cue is changed by go, record, or update instructions as well as cue modification or

selecting a cue on the command line. When you execute a cue that has a follow or hang time, the

next cue will become the selected cue when activated.

In Blind

While in blind, changing the selected cue will change the playback status display to show

information surrounding that cue.

While working in blind mode, cues can be executed using [Go], [Back] and [Go to Cue], but this

does not change the cue you are working with in blind.

CAUTION:

When editing in blind, changes to cues are automatic, therefore no update or

record command is required. Changing cues in blind will alter the cue instantly.

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 337 338

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 193