Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 97)

Express 125/250 User Manual, v.3.1 83

Working with cues in Stage

When recording in Stage, such as to record a cue, group or submaster,

you will commonly want to start without any live channels. For instance,

you may want to create a new cue without using any of the lights placed

on stage from a previous fade or channel selection. To clear lighting from

the stage, use one or all of the following procedures:

• If the lights are from a cue in a fader, press the fader’s [Clear] key one

or more times.

• If the lights are captured, press [Rel] two or more times.

• If from a submaster, lower the slider to zero.

• If from channels running in the background, press [S3], Background

Overrides, [Enter] [Enter].

Recording a cue in Stage

There are several ways you can create a cue from a look on stage. If you

have several cues already stored, you may want to base a new cue on the

look already recorded for another cue. You would do that by playing the

cue in the faders and then modifying the resulting look on stage.

In other circumstances, you may want to enter all channel levels manually.

That is the procedure used below. When creating this cue, you will only

set channel levels. Default settings will determine all other attributes of

the cue. You can change most default settings from the System Settings

menu. See Chapter 3 System settings, for information about setting and

changing defaults.

Follow these steps to record cue 1:

Keystrokes: Action:

1. Press [Stage]. Selects Stage display mode

Prompt reads:

Select channel numbers

2. Press [1] [Thru] [1][0]. Selects channels 1 through 10

3. Press [At]. Prompt reads: Enter intensity

4. Press [5][0]. Sets a level of 50 percent for

channels 1 through 10

5. Press [Record]. Prompt reads:

To record cue, select number

and press ENTER

To cancel, press CLEAR

6. Press [1]. Selects cue 1

7. Press [Enter]. Records cue 1 containing

channels 1 through 10 at 50

percent

8. Press [Rel]. Releases captured channels

44.

Note that the keypad defaults to cue mode when you press [Record].

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 379 380

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 97

Comentários a estes Manuais