Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 121)

100

101

Express 125/250 User Manual, v.3.1 107

Pulling channels in Blind

If you insert in Blind using [Track], you can get a start on a new cue by

using levels already defined in the previous cue. You can then add

channels or modify levels in the new cue. From that point on, you can use

either [Record] or [Track] analogously to the procedures explained above,

depending upon whether or not you want the channels in the inserted cue

to track into subsequent cues.

Press the following keys to insert cue 2.5 in Blind by pulling in levels from

previous cue 2.0 and adding channel 5 at 70 percent. Note that the new

cue in this example will track into subsequent cues as well because of the

second use of [Track] in step 5.

The following illustration shows this insertion and subsequent tracking.

Chan 1 Chan 2 Chan 3 Chan 4 Chan 5

Cue 1 50

Cue 2 50 FF 00

Cue 2.5 50 FF 00 70

Cue 3 50 FF FF 70

Cue 4 25 FF FF FF 70

Cue 5 00 00 00 00 70

Keystrokes:

Actions:

1. Press [Blind] [2][.][5].

Displays empty cue 2.5

Prompt reads:

Select cue number

To select cue type, press TYPE

2. Press [Track] [Enter].

Pulls in previous cue’s channels

3. Press [Channel] [5] [At]

[5][0].

Adds channel 5 at 50 percent

Prompt reads:

Select channel numbers

4. Press [Track].

Prompt reads:

To record cue & tracking, select

number and press ENTER

To cancel, press CLEAR

5. Press [Enter].

Records cue 2.5

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 379 380

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 121

Comentários a estes Manuais