Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 127)

100

101

Express 125/250 User Manual, v.3.1 113

Converting a standard cue to a multipart cue

If you have already created a single-part cue, the console allows you to

reconfigure it as a multipart cue. You can convert a standard cue to a

multipart cue in either Stage or Blind mode, but it’s easier in Blind because

levels are highlighted.

Once you create the first part, all channels not assigned to that part are

automatically assigned to part 8. As you create additional parts from

channels in part 8, they are deleted from part 8 and added to the selected

part.

Follow these steps to convert cue 1, assumed to be a standard cue, to a

multipart cue. This example is in Blind.To perform the equivalent

procedure in Stage, run the cue in the faders before preceding with step 3.

Keystrokes:

Action:

1. Press [Blind].

Selects [Blind] display

2. Press [Cue] [1].

Selects cue 1

3. Press [Channel] and select

the channels for a part.

a. If in Stage, selection defaults to channels so you do not need

to press [Channel].

4. Press [S7], More

Softkeys, until Part

appears as softkey [S1].

Finds the Part softkey

5. Press [S1], Part, followed

by the part’s number and

then [Enter].

Creates the designated part.

6. Repeat steps 3-5 to create

the other parts, as desired.

Creates more parts for this cue.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 379 380

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 127

Comentários a estes Manuais