Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 176)

162 Chapter 13 Submasters

Inhibitive submasters

Creating

Inhibitive submasters allow you to limit the output of a group of channels.

Channel outputs are limited to the level at which you set the slider. An

inhibitive submaster set at 10 (100 percent), does not affect channel

output. An inhibitive submaster controls the levels of its assigned

channels in the same way the Grandmaster controls the levels of all

channels.

Note: If channels that you expect to see on stage are missing or at the

wrong levels, check to see if a submaster is inhibiting them. If a channel

is fully inhibited by a submaster, its level will be displayed as a yellow zero.

Follow these steps to create and add channels to an inhibitive submaster:

Follow the same procedure to convert back to pile-on.

• You may include the same channel in more than one inhibitive sub-

master.

• If you press an inhibitive submaster’s bump button, the submaster

fades from its current slider location to zero and back, using its record-

ed fade times.

Keystrokes: Actions:

1. Press [Stage]. Selects Stage display

2. Press [Sub] and enter the

number of the submaster

(1 to 24) you wish to be

inhibitive.

Selects sub to change

Prompt reads:

Select submaster number

To select submaster type, press

TYPE

3. Press [Type] [2]. Specifies sub is inhibitive

Prompt reads:

Select submaster type

(1 = Pile-on, 2 = Inhibitive, 3=Effect)

4. Press [1][0] [Thru] [2][0]. Adds channels 10 through 20 to the sub

5. Press [Record] [Sub]

[Enter].

Records new inhibitive sub

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 379 380

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 176