Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 70)

56 Chapter 5 Setting channel levels

Selecting channels

Using the keypad to set channel levels involves two steps: selecting the

channels whose levels you want to modify, then entering output levels.

• To select a single channel, enter the channel number preceded by

[Channel] if the [Channel] LED is not lit. For example, [Channel] [1]

selects channel 1 or just entering 1 will do it if the [Channel] LED is lit.

• To select two channels that are not consecutively numbered, enter

the number of the first channel, then press [And] and enter the

number of the second channel. For example, [Channel] [1] [And] [7]

selects channels 1 and 7.

• To select a group of consecutively numbered channels, enter the

number of the first channel, then press [Thru] and enter the last num-

ber. For example, [Channel] [1] [Thru] [9] selects channels 1, 2, 3, 4, 5,

6, 7, 8, and 9.

• To exclude consecutive channels from a selected group of channels,

press [Except] before entering the channels to exclude. For example,

[Channel] [1] [Thru] [1][5] [Except] [5] [Thru] [1][3] selects channels 1,

2, 3, 4, 14, and 15.

• Use [And] to select each non-consecutive channel to include in a

selection. For example, [Channel] [1] [Thru] [5] [And] [8] [And] [1][1]

selects channels 1, 2, 3, 4, 5, 8 and 11.

• Use [Except] to exclude each non-consecutive channel from a selec-

tion. For example, [Channel] [1] [Thru] [5] [Except] [1] [Except [5]

selects channels 2, 3 and 4.

• If no channels are selected, press [Enter] to select all channels cur-

rently at a level above zero.

Once you have entered your channel selections, you are ready to set

channel levels.

Selecting channels in Flexichannel mode

In Flexichannel mode, only channels that are used in the show appear on

the Stage, Blind and Fader displays. See Flexichannel, page 18, for

information on enabling and updating Flexichannel.

When Flexichannel mode is enabled, the [Thru] key functions slightly

differently. For example, in normal mode, pressing [1] [Thru] [5] selects all

channels from 1 to 5. In Flexichannel mode, pressing [1] [Thru] [5] selects

all visible channels from 1 to 5.

To select all

channels from 1 to 5, including channels that haven’t been

used in the show so far, press [1] [Thru] [Thru] [5]. Pressing [Thru] a

second time alerts the system to ignore Flexichannel for that channel

selection.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 379 380

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 70