Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 119)

Express 125/250 User Manual, v.3.1 105

Inserting cues

If you insert a cue in this sequence, Record and Track produce different

results. Record saves changes only in the cue you insert while Track saves

the changes you make and tracks them through the following cues.

The example given below is in Stage. You can get the same results in

Blind but with the additional advantage that you can pull channels from the

immediately previous cue. An illustration of pulling channels when

inserting a cue is given after the comparison between Record and Track

in Stage.

Using Record

The following keys were pressed to release captured channels and play

back cue 1. With cue 1 in a fader, channel 4 is added at 50 percent. The

new look is inserted as cue 1.1.

The following diagram illustrates what happens when you insert cue 1.1

using [Record]. Note that the channel in cue 1.1 is not added to the cues

that follow it. In fact, that channel is faded out when cue 2 is played.

Chan 1 Chan 2 Chan 3 Chan 4 Chan 5

Cue 1 50

Cue 1.1 50 50

Cue 2 50 FF 00

Cue 3 50 FF FF

Cue 4 25 FF FF FF

Cue 5 00 00 00 00

Keystrokes:

Actions:

1. Press [Stage] [Rel] [Rel].

Releases captured channels

Prompt reads:

Select channel numbers

2. Press [Cue] [1] [Go].

Plays back cue 1

3. Press [4] [At] [5][0].

Modifies channel 4

4. Press [Record].

Prompt reads:

To record cue, select number and

press ENTER

To cancel, press CLEAR

5. Press [1][.][1] [Enter].

Records cue 1.1

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 379 380

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 119