Electronic Theatre Controls Emphasis Lighting Control System Especificações descarregar pdf (Página 327)

100

101

Express 125/250 User Manual, v.3.1 313

Configuring the DMX512 ports

Once your console is installed, you may need to reset some hardware

configuration settings. The Output Configuration screen allows you to

reset the starting dimmer numbers for your DMX512 ports, set your ports

for dimmer doubling and adjust the DMX512 signal speed if your dimming

system requires a slower signal.

Port starting dimmer numbers

Each port has a starting dimmer number which can re reset in the Output

Configuration display. Shown above are the default starting dimmer

numbers for Express consoles.

Unless using dimmer doubling,

122

you might want to set different starting

numbers, such as when default port settings would result in some racks

being connected to two ports. For example, if your system included 10

racks, each with 96 dimmers, you could set port 2 to start at 481.

Set port starting numbers in the Output Configuration screen as follows:

1. Press [Setup] to display the Setup Menu.

2. Press [2], Output Configuration, and press [Enter].

3. Press [↓] to select the port to configure (port 1 or 2).

4. Press [S3], Starting Dimmer.

5. Enter the desired starting number for the port.

6. Press [Enter] twice to confirm your choice.

122.

You cannot change starting dimmer numbers when using Dimmer Doubling. See

Setting the port to Dimmer Doubling, page 314.

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 379 380

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls Emphasis Lighting Control System Especificações Página 327

Comentários a estes Manuais