Electronic Theatre Controls PARADIGM Especificações descarregar pdf (Página 4)

9) WARRANTIES

A) The manufacturer of the stage lighting and control equipment shall warranty the Stage Wiring Devices

and Dimming and Control equipment to be free from defects of material or workmanship for a period of

two years from the date of acceptance. During the period of this warranty, equipment which proves to be

defective shall be repaired or replaced at no charge (excepting freight). Unauthorized local repairs of the

equipment during the warranty period shall relieve the manufacturer of its responsibilities under this

warranty.

B) UL/CE Labels: All items of equipment and individual components where applicable standards have been

established shall be listed by the Underwriter's Laboratories, Inc. and the European Commission

Conformity Standards and shall bear the UL and CE label when delivered and installed on the jobsite.

C) NEC Compliance: Equipment and Installation shall comply with the National Electrical Code (NFPA 101)

as applicable to installation and construction of stage lighting and control equipment.

D) NEMA Compliance: Equipment shall comply with the standards of the National Electrical Manufacturers

Association pertaining to components of stage lighting equipment.

E) ANSI Compliance: Theatrical Dealer shall provide electric lamps which comply with ANSI construction

and rating standards.

F) Certificate of Installation: Theatrical Dealer shall submit certificates from the manufacturer's field

engineer stating the installed system is operating properly and complies with manufacturer's

recommendations.

10) PRODUCT DELIVERY, STORAGE AND HANDLING

A) Stage lighting equipment and controls shall be delivered securely wrapped in factory fabricated wooden

or fiberboard type containers.

B) Equipment and controls shall be handled carefully to prevent breakage, denting and scoring finish.

Damaged equipment and controls shall not be installed; damaged units shall be replaced and returned to

equipment manufacturer.

C) Stage lighting equipment and controls shall be stored in clean dry spaces. They shall be stored in original

cartons and protected from dirt, physical damage, weather and construction traffic.

11) LEED REQUIREMENTS

A) Within thirty (30) days after the date of system commissioning and sign off, record drawings of

the actual installation shall be provided to the owner.

B) A minimum of 50% of stage lighting materials that are manufactured regionally within a radius

of 500 miles shall be used.

Part 2 – PRODUCTS

2.1) GENERAL

A. All components shall be new, in original factory packaging, in new condition and under warranty.

B. All components shall bear UL/CE labels and labels identifying the manufacturer, model number

and serial number. All such labels shall be permanently attached in a conspicuous location.

C. All control and receptacle faceplates not otherwise described elsewhere in this specification

shall be black anodized aluminum or black painted steel with beveled edges and rounded corners.

The minimum text height for all faceplates unless specifically specified elsewhere shall be ¼ inch.

D. Control signal protocol and connector types shall comply with current (as of the date of this

specification) DMX-512 standards as set forth by the United States Institute for Theatre Technology

1 2 3 4 5 6 7 8 9 ... 50 51

Sem comentários

Electronic Theatre Controls PARADIGM Especificações Página 4