Electronic Theatre Controls PARADIGM Especificações Página 26

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 51
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 25
2
6
3) Multiple sACN sources may be combined with a priority may be assigned to each
source sending data to the gateway.
G) Network
1) Communications physical layer shall comply with IEEE 802.3i for 10BASE-T, 802.3u
for 100BASE-TX and 802.3af for Power over Ethernet specifications.
2) All network cabling shall be Category 5 (or better), conforming to TIA-568A/B, and shall
be installed by a qualified network installer.
3) Data transport shall utilize the TCP/IP suite of protocols to transfer the DMX data.
4) ANSI E1.31 streaming ACN (sACN) shall be supported. Gateways that do not support
ANSI E1.31 shall not be acceptable.
5) Switches shall comply with power-over-Ethernet IEEE802.3af, unless a separate in-line
power supply is provided.
6) Each DMX gateway shall control up to 512 DMX addresses, per DMX port within the
confines of up to 63,399 universes (32,767,488 addresses) when using Streaming
ACN (sACN) and 64 DMX universes (32,767 addresses) when using EDMX.
7) Multiple sources shall be supported by prioritized Highest Takes Precedence (HTP
with priority). Each source shall support assignment of priority to allow override of
default HTP behavior.
8) Each DMX port shall support its own universe and start address.
9) Gateways shall support built in priority on a per-universe or channel-by-channel basis.
Gateways that do not support prioritized merging of multiple network sources at
independent channel priorities shall not be accepted.
H) Environmental
1) The ambient operating temperature shall be 0° to 40°C (32° to 104°F).
2) The storage temperature shall be -40° to 70°C (-40° to 158°F).
3) The operating humidity shall be 5% - 95% non-condensing.
I) Accessories
1) Hanging bracket kit shall allow gateway to be mounted using C-Clamp to U-bolt
Hardware.
2) ETC Network Configuration Editor (NCE) software
J) System Requirements
1) Provide the quantity and type of gateways required, as scheduled. Gateways and
software shall be as manufactured by Electronic Theatre Controls Inc. of Middleton,
WI.
2) Provide Ethernet switches and power supplies as scheduled and as shown on
drawings.
Vista de página 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 50 51

Comentários a estes Manuais

Sem comentários