Electronic Theatre Controls PARADIGM Especificações descarregar pdf (Página 61)

3 Programming 56

Overrides

Step 1: Scroll to select “Overrides” from the “Arch Control” menu and press enter ( ).

The “Select Overrides” menu list displays all overrides created in the

LightDesigner configuration along with their current status. Override status can

be either “Active” or “Inactive”. Overrides are listed in alphabetical order.

Step 2: Scroll to select an override and press enter ( ). The override status toggles

between “Active” and “Inactive” each time enter ( ) is pressed.

Clear Arch Output

Step 1: Scroll to select “Clear Arch Output” from the “Arch Control” menu and press enter

().

Step 2: Scroll to select option and press enter ( ).

• Select “Cancel” to return to the “Arch Control” menu.

• Paradigm maintains a cache of levels last sent from DMX called the “Boot

Look”. “Clear Boot Look” only removes those levels from output.

• “Clear ALL Arch Control” sends all architectural control channels to default

levels (usually zero for zones and home positions for multi-parameter

fixtures). This will also clear the “Boot Look”, however gateway or DMX pass-

through data will remain unaffected.

Note:

Channels may have a minimum, or default, attribute level defined that is non-zero.

When “Clear ALL Arch Ctrl” is enabled, the channel will be restored to the defined

default levels.

Daylight: Inactive

Nite Mode: Inactive

Occupancy: Active

Timed Event: Inactive

Select Override

The “Overrides” menu provides the tools to change the current

state of an override. Overrides are created in the LightDesigner

configuration to override timed events from affecting lighting, or

to integrate occupancy or daylight harvesting sensors into a

lighting system.

This will affect

local Arch control

for both DMX and ACN.

Select an option:

Cancel

Clear Boot Look only

Clear ALL Arch Ctrl

Clear Arch Output

The “Clear Arch Output” menu provides the tools to zero only

intensities or reset all attribute levels to zero for all channels

connected to the Paradigm ACP (all local arch control for both

DMX and sACN outputs). This action is similar to a blackout

command from a control console and fade times do not apply.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 95 96

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls PARADIGM Especificações Página 61

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Electronic Theatre Controls PARADIGM