Electronic Theatre Controls PARADIGM Especificações descarregar pdf (Página 42)

37 Paradigm Architectural Control Processor Configuration Manual

Patch Dimmers

Dimmers set for dimmer doubled mode or to hi-resolution 16 bit DMX operation from the

Dimmer Setup menu require two DMX addresses.

• A dimmer set for dimmer doubled mode requires two DMX addresses. By default the

second address (called the “b” side) will be set to +256 address offset from the starting

address (called the “a” side). For example if dimmer 1 (the “a” side) is set to dimmer

doubled mode and DMX address 1, the second channel of control for dimmer 1 (the “b”

side) would be DMX address 257, by default. The default offset for the “b” side cannot

be greater than 512. When these conditions exist, the “b” side will be set equal to the

“a” side (example 260a and 260b).

• A dimmer set for hi-resolution 16 bit mode requires two DMX addresses. By default the

second address (called the “L” side) is applied a +1 address offset from the starting

address (called the “H” side). For example if dimmer 2 is set to hi-resolution 16 bit mode

and DMX address 2, the second channel of control for dimmer 2 would be DMX

address 3.

You may use “and / thru” functions to specify a selection or range of dimmers for patch

editing. Once your selection is made, press enter ( ) to accept the selection and begin

editing. To remove the last selected dimmer from the selection, press the back button ( ).

Continue pressing the back button ( ) to clear all undesired dimmers from the selection.

In the examples above, the start address for a dimmer range selection is highlighted and

ready for editing. When a hi-resolution 16-bit dimmer is selected, both the high and low

addresses are selected for editing.

Step 1: Make a selection of dimmers for advanced patch using either the touch wheel or

the alpha-numeric button pad. Press enter ( ) to accept the selection.

Patch Dimmers

Mode: Dim: DMX DMX

1: 111

DD 2: 112a 368b

3: NA

4: 113

HiR es 5: 114H 115L

DD 6: 116 a 117b

When patching your dimmers using the advanced patch menu,

you can edit any existing dimmer in your rack that is patched,

including that which had been set using the “Patch by DMX

Start” menu.

When a dimmer is not patched to a DMX address “---” is

displayed. When dimmer module type has less than two

controllable addresses (for example CC20, D20F), “NA”

displays any non-editable dimmer.

1 and 3 thru 6

Mode Dim DMX DMX

1: 111

DD 2: 121a 377b

DD 3: ---a ---b

4: ---

HiRes 5: ---H ---L

6: ---

1 and 3

Mode Dim DMX DMX

1: 111

DD 2: 121a 377b

DD 3: ---a ---b

4: 112

HiRes 5: 115H 116L

6: 125

Using “and” Using “thru”

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 95 96

Comentários a estes Manuais

Sem comentários

Electronic Theatre Controls PARADIGM Especificações Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Electronic Theatre Controls PARADIGM